Technical University of Munich Leverages VABS to Accelerate Design of Extreme Altitude Composite Rotorcraft Blades

West Jordan, Utah (USA)- AnalySwift, LLC, a provider of efficient high-fidelity modeling software for composites and other advanced materials, announced today Technical University of Munich (TUM) is leveraging its powerful VABS software to accelerate design of composite helicopter rotor blades. TUM has used VABS for a variety of projects, including the Autonomous Rotorcraft for Extreme Altitudes (AREA) research project, in its Institute of Helicopter Technology, which is part of the Department of Mechanical Engineering.

Researchers at TUM with the AREA project used VABS to help in the design of a new rotor blade for a rotary-wing UAV (MTOW 30kg), which can operate at extreme altitudes (up to 9,000 meters). The main objective of this project is to gain knowledge during high altitude flight-tests about the performances and the autonomous flight control system. A secondary objective is to discover possible application scenarios such as environmental monitoring and search and rescue. According to the researchers, these types of rotary UAVS have been previously unavailable, due in part to several design challenges.

“The AREA rotor blade was completely designed, built and tested at the Institute of Helicopter Technology at the Technical University of Munich,” said Tobias Pflumm, PhD student at TUM. “The use of VABS has been a major part of my work on the design of helicopter blades. With VABS the determined sectional center of mass, shear center, stiffness and mass properties were fed back to the elastic beam CAMRAD II helicopter model of the UAV. The resulting sectional loads were transformed back into VABS to examine corresponding strains and stresses within the material frame for the application of composite failure criteria.”

“The preliminary design with VABS was followed by a detailed design of sub-components, as well as the design of the rotor blade’s molds and construction documents,” said Pflumm. “To ensure safe operations appropriate test procedures such as computer tomography, three-point bending test of the homogeneous blade section, a pure tensile test to examine the bearing laminate strength as well as a combined load case with axial and flap loading and a pull out test of the balance chamber were performed. Last but not least, an analysis of the rotor blade eigenfrequencies was conducted with accelerometers.”

This research related to the design and construction of a UAV rotor blade for use in extreme flight altitudes is highlighted in publications authored by Pflumm and his colleagues.


AREA rotor blade designed at TUM with the help of VABS. It has a NACA23012 airofil with a radius of R=1,65m, chord length=100mm, Twist=-10° and taper of 60%c starting at r=0.6.

“We have worked with Technical University of Munich for several years now and are pleased they selected VABS to assist in their composite blade simulation,” said Allan Wood, president and CEO of AnalySwift. “TUM is conducting exciting research to address the unique challenges of designing a composite rotor blade meant for high-altitude environments.”

“The VABS program is a uniquely powerful tool for modeling composite blades and other slender structures, commonly called beams,” said Dr. Wenbin Yu, CTO of AnalySwift. “VABS reduces analysis time from hours to seconds by quickly and easily achieving the accuracy of detailed 3D FEA with the efficiency of simple engineering models.

“With VABS, engineers can calculate the most accurate, complete set of sectional properties such as torsional stiffness, shear stiffness, shear center for composite beams made with arbitrary cross-section and arbitrary material,” said Yu.  “It can also predict accurate detailed stress distribution for composite beams.”

With continuous development spanning 20 years for performance and robustness, VABS is used in the aerospace and wind energy industries for modeling complex composite rotor blades, wing section design, and simulating other slender composite structures. Developed at Georgia Institute of Technology (Georgia Tech) and Utah State University, VABS is available through AnalySwift at

CAMRAD II is an aeromechanics analysis that incorporates a combination of advanced technologies (including multibody dynamics, nonlinear finite elements, and rotorcraft aerodynamics) to produce results for performance, loads, vibration, and stability of rotors and rotorcraft. CAMRAD II was developed by Dr. Wayne Johnson, and is distributed by Analytical Methods, Inc.

 The full press release is also available here.

About AnalySwift

AnalySwift, LLC is a provider of composite software, which enables an unprecedented combination of efficiency and accuracy, including multiphysics structural and micromechanics modeling. Drawing on cutting edge university technology, AnalySwift’s powerful solutions provide customers a competitive advantage through drastic reductions in engineering time, virtual testing earlier in the design process, and handling of more complex composite structures. Licensed from Purdue University, Utah State University, and Georgia Institute of Technology, our technologies deliver the accuracy of detailed 3D FEA at the efficiency of simple engineering models, cutting analysis time by orders of magnitude. Find out more at

Media Contact:
Allan Wood

Recent Posts
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.

Start typing and press Enter to search